• Can a KBK crane system be expanded later?

Yes, a KBK crane system can be expanded at a later stage. In fact, that is one of the greatest advantages of this type of light-duty crane: the modular design makes it possible to scale the system step by step in line with the needs of your business. In this article, we answer the most frequently asked questions about expanding a KBK crane system, from the technical possibilities to the inspection after expansion.

What makes a KBK crane system suitable for expansion?

A KBK crane system is suitable for expansion thanks to its modular construction. The profiles, connectors, and running components are interchangeable and standardised to work together. This means that new sections, hoists, or runways can be added without the need to completely replace the existing system.

This modularity is no coincidence, but a deliberate design choice. KBK systems use standardised profile rails and coupling pieces that manufacturers have consistently produced for decades. This means that components installed years ago are in many cases still compatible with new parts. For companies that are growing or changing their work processes, this is a significant advantage: you do not need to reinvest in a complete system, but build on what is already in place.

In addition, KBK systems are relatively lightweight, which limits the structural load on the building. This makes it easier to realise expansions without major modifications to the building structure.

In what ways can a KBK crane be expanded?

A KBK crane can be expanded in several ways, depending on the operational need. The most common forms of expansion are extending the runway, adding an extra hoist or lifting unit, expanding to a second runway line, and integrating additional automation or controls.

In concrete terms, this means:

  • Runway extension: additional profile rails are connected to the existing system, giving the crane a greater reach across the work floor.
  • Extra lifting unit: a second hoist or electric lifting device is added, allowing multiple loads to be lifted simultaneously or alternately.
  • Second runway line: a parallel runway is installed so that two cranes can operate independently of each other within the same system.
  • Controls expansion: manual operation is converted to semi-automatic or fully automated control, including integration with production systems.

Which expansion is most appropriate depends on the current configuration, the load capacity of the existing profiles, and the requirements of the work process. A technical assessment in advance is always advisable.

When is expansion of an existing KBK system possible?

Expansion of an existing KBK system is possible when the current profiles and suspension structure have sufficient capacity for the additional load and when the existing components are compatible with the new parts. If that is the case, expansion can in most situations be realised without major structural interventions.

However, there are situations in which expansion is not straightforwardly feasible:

  • The existing profiles are at maximum load and cannot bear additional weight or span.
  • The suspension points in the building do not offer sufficient load-bearing capacity for the new configuration.
  • The system is so outdated that the new components are no longer compatible with the existing profile series.
  • The desired expansion requires a fundamentally different runway layout that does not connect to the current layout.

A technical inspection of the existing system is therefore the first step. This involves assessing the condition of the profiles, the fixing points, and the electrical installation. Based on this, it can be determined whether expansion is responsible and technically feasible.

What is the difference between expanding and replacing a crane system?

Expanding means that the existing KBK system is supplemented with new components while the core of the system remains intact. Replacing means that the entire system is removed and rebuilt from scratch, usually because expansion is no longer technically feasible or because the operational requirements have fundamentally changed.

The choice between expanding and replacing depends on a number of factors:

  • Age and condition of the system: a system that is still in good technical condition is better suited for expansion than a system with wear or outdated components.
  • Scale of the desired change: small adjustments in reach or capacity are generally expansions; a completely new workplace layout often calls for replacement.
  • Cost consideration: expansion is in most cases cheaper in the short term, but if the existing system will need to be replaced within a few years anyway, direct replacement may be the more economically sound choice.
  • Compatibility: if the existing profiles and components are still available and compatible with new parts, expansion is realistic.

A good rule of thumb: if more than half of the system needs to be replaced to achieve the desired situation, full replacement is often the better choice.

How does the process of a KBK crane expansion proceed?

The process of a KBK crane expansion follows a number of fixed steps: technical inspection of the existing system, engineering of the expansion, fabrication or delivery of the new components, installation, and finally inspection of the expanded system. The lead time varies depending on the scope of the expansion.

In practice, the process looks as follows:

  1. Inventory and inspection: the current situation is mapped out, including load capacity, profile type, and electrical installation.
  2. Engineering: based on the desired expansion, a technical design is created, including calculations for load and fixing.
  3. Preparation and fabrication: the required components are ordered or fabricated, and the installation is scheduled to minimise production downtime.
  4. Installation: the new components are integrated into the existing system by certified installers.
  5. Inspection and commissioning: the expanded system is inspected and tested before it is put back into operation.

Careful planning is essential to keep the downtime of your production process as short as possible.

Does an expanded KBK system need to be re-inspected?

Yes, an expanded KBK system must always be re-inspected before it is put back into operation. Any modification to a lifting installation, however minor, falls under the statutory obligation for re-inspection. This also applies when only the runway is extended or an extra hoist is added.

The purpose of the inspection is to confirm that the entire system, including the new components and the connections to the existing system, functions safely under maximum load. During the inspection, the following are checked, among other things:

  • the mechanical connections and fixing points of the expansion;
  • the electrical installation and safety provisions;
  • the functioning of the emergency stop and overload protection;
  • the maximum load capacity of the complete system after expansion.

After the inspection, you will receive an inspection report that serves as proof of the system’s safety. The regular annual inspection obligation then applies to the entire installation.

How BKRS helps with expanding your KBK crane system

We guide the entire process of KBK crane expansion, from the initial technical assessment through to the inspection after installation. As an accredited inspection and crane construction company with more than forty years of experience, we take the complete process off your hands, with a single point of contact for all steps.

What we provide for you:

  • Technical inspection of your existing KBK system to determine the expansion possibilities
  • Engineering and custom design of the expansion, tailored to your work process
  • Fabrication and delivery of the required components from our workshop in Veghel
  • Professional installation by our certified installers, with minimal production disruption
  • Inspection and certification of the expanded system, including an inspection report
  • Ongoing maintenance and inspection after commissioning

Do you have questions about the expansion possibilities of your KBK crane system or would you like to know what is technically feasible in your situation? Contact us and we will be happy to think along with you.

Frequently Asked Questions

How long does expanding a KBK crane system take on average?

The lead time depends on the scope of the expansion. A simple runway extension can often be completed within one day, while more complex expansions such as a second runway line may take several days. Good planning in advance helps to keep the downtime of your production process to a minimum.

Can I expand my KBK system without completely shutting down production?

In many cases it is possible to schedule the installation in such a way that production disruption is minimal, for example outside working hours or in phases. This is discussed during the engineering phase and tailored to your situation. A certified crane construction company can advise on this and optimise the planning.

What are the costs of a KBK crane expansion?

The costs vary considerably depending on the type of expansion, the required components, and the scope of the installation. Expansion is in most cases cheaper than full replacement, but a technical inspection is needed to produce a realistic cost estimate. Always request a quote based on your specific situation.

How do I know whether my existing KBK system can still be expanded?

That can only be determined after a technical inspection of the existing system. This involves assessing the condition of the profiles, the load-bearing capacity of the suspension points, and the compatibility with new components. Contact a certified crane construction company to have the expansion possibilities assessed for your situation.

Related Articles

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.